Monthly Archives: September 2016

Archive of posts published in the specified Month

Sep
13

Explicate LED Modules Chip

led_module-s_chip

Generally speaking, there are three kinds of chips in the back of the LED module: 1 (blue) this is the LED module driver chip, is generally MBI5020 MBI5024… Mainly used to control the vertical LED column 2 (green) this is Manager IC Line.…

Sep
12

Best price Car LED Control Card 35 USD

lc-2gm_gprs_2g_remotel_card_1

As the recently, car screen especially popular, our own R & D design of vehicle control card With a very affordable price in full color. LC-2GS (35USD 32*256Dots)  and LC-2GM (68USD 128*320Dots) Board with HUB75 interface All using 2G communication mode. Can not…

Sep
10

How to linsn RCG intelligent setup

intelligent_setup

Many customers need to configure Linsn receive cards, before use the LED Display. But they do not know how to do it. Here to share the Linsn intelligent setup manual, Hope to help you!  PDF File: linsn-rcg-intelligent-setup

Sep
7

How to upgrade Linsn receiver Card’s program

Linsn_Receiver_upgrade

Enter the hardware interface settings{ Option > software setup > (input “Linsn” password”168″) > receiver > (input “cfxoki”) }. In the receiving card input ‘cfxoki’ pop-up card upgrade interface. Load the “***.bin” file to programming. Attention: The upgrade program must upgrade with sending…

Sep
7

How to cascate of two TS802

4

Hardware ready: 1, a DVI cable (DVI cable a turn two lines) 2, 2 linsn 802 send card 3, a ten-pin cable   the hardware connection with ten pins traversing cascading up two to send a card, as shown in Figure 1.2 each…