Description
DBS-HVT11 full color LED sending board (HVT 2011)
Type | Typical value | Max value |
Supported screen type | single color, dual-color,full-color, real pixel,virtual pixel. | |
Supported LED drivers | MBI5026/MBI5030/MBI5036/ MBI5039/MBI5042/MBI5050/MBI6024/ LPD6803/DM413/DMX512/ZQL9726 TCD62D722/TC62D766/MBI5050/MBI6024 | |
Pixels by single sending card | 2048×640(dual ports) | |
Number of receiving cards connected by cable | <100 | 256 |
Pixels by single receiving cards | 256 x192 full color 1024 x512 dual color | 512×384 full color 1280 x512 dual color |
RGB data groups by single receiving card | 16-24 | 24 |
Lines by one group RGB | 1/2/4/8/16/32 | 32 |
Grey grades | 4096(4k) | 65536(64k) |
Data CLK frequency | 15.62MHz | 31.25MHz |
Refresh rate | 180Hz | >3600Hz( like MBI5042 ) |
Brightness wastage | 15~20% | <5% |
PWM brightness adjust degree | 256(may automatically adjust by brightness sensor) | |
Electronic current plus brightness adjustment grade | 64/256(according to led drivers) | |
Dot by dot revise pixels by PWM brightness | 64×64 | 256×256 |
Pixels on open circuit and short circuit error detection | static: 2048×16 / 1/2: 1024×16 1/4: 2048×16 1/8: 4096×16 1/16:8192×16 | |
Fiber transmission distance | Multi-mode fiber 500meters single-mode fiber 10KMs | |
Other functions | Power on gradual protection OE Polarity switch protect screen scan tubes, led screen self-detecting | |
No sending card function | Sending images by 1000M network card PC |
What is Included:
1 x DBS-HVT11 sending card
1 x DVI cable
1 x USB cable
(For software CD & manual you can ask for link to download)
Antonio Cannone –
HVT11 controller works well, good product.Thanks Rita again.